




Zebra Kitchen.
Zebra Kitchen, designed and manufactured under one roof in Lahore. Drawer and shutter sizes are set so the things you reach for daily sit between shoulder and hip height. The same team that measures it also builds and installs it, so nobody is passing responsibility along a chain. Every dimension is set after a site measurement, so the finished piece fits your room rather than an average one.
- Made to order in our own Lahore facility
- Imported boards, hinges and channels
- Soft close hardware as standard
- Free 3D design before manufacturing
Why this kitchen lasts.

The work triangle, kept tight
Sink, hob and fridge are placed so the walking between them stays short, and so a second person can reach the sink without crossing the person at the hob.

Sockets where you will want them
Socket and switch positions are agreed against the final layout, so the kettle, the blender and the microwave each have a point without an extension lead crossing a worktop.

No cupboard you cannot reach into
Every corner gets a decision at design stage. Left unplanned, a corner becomes the deepest and least usable cupboard in the kitchen.

You approve it in 3D before it is cut
You see the piece rendered in your own room before manufacturing starts, so changes happen on a screen rather than on site where they cost money.
Four steps, no surprises.
Survey
We visit your address in Lahore, measure the space and record the services already in place.
Design & Quote
You see it in 3D and receive a written estimate. Nothing is cut until you approve both.
Manufacture
Built at our Raiwind Road facility with imported boards and soft close hardware.
Install & Handover
Fitted by our own teams, then adjusted after handover if anything settles.
From measurement to installed.
Free measurement visit
Our team visits your address in Lahore, measures the space and records the services already in place.
Free 3D design
You see the design rendered in 3D before anything is manufactured, so changes happen on screen rather than on site.
Made in our own facility
Manufactured at our Raiwind Road facility rather than subcontracted out, so quality and timing stay with us.
Imported boards and hardware
Boards, hinges and channels are imported, with soft close hardware fitted as standard.
Installed by Grains teams
The crew that installs it works for us, so the finish is our responsibility from first cut to final adjustment.
Finish and colour your choice
Colour, finish and material are chosen by you and matched to the rest of the room.
Questions, answered.
Yes. Nothing in this range is a fixed size. We measure your space first and build the kitchen to those dimensions, so it fits wall to wall instead of leaving a gap.
Yes. The photographs show one combination. The same design can be built in a different colour, finish or material, and we will show you the alternative in a 3D render before manufacturing starts.
Message us on WhatsApp at +92 320 4443864 with your room size and a photo of the space. We will come and measure free of charge, prepare a 3D design and give you a written estimate before you commit to anything.
Yes. Visit a Grains display centre in Lahore, or the manufacturing facility at LDA Chowk on Raiwind Road, and see the boards, hardware and finish in person.
Want this in your home?
Send us the room measurements, or just a photo of the space. We will visit, measure it properly and show you a free 3D design of the Zebra Kitchen built for your room before you spend anything.
Or call us directly, +92 320 4443864



